Following Vehicle Manufacturer’s Maintenance Guidelines

Vehicle Manufacturer's Maintenance

Drivers should make every effort to maintain their vehicles according to specific guidelines laid out by the manufacturers. An oil change is highly recommended based on a specific time interval or miles driven. For example, a standard size sedan should have its motor oil and filter replaced every 5,000 miles or six months, whichever comes first.

Vehicle Manufacturer's Maintenance

Auto service shops might offer incentives for loyal customers. Reward points could be gathered every each visit and then redeemed for future auto repair and maintenance. The rewards might be offered based on the total cost of each visit to the auto shop. Additionally, extended warranties on all parts and labor can be guaranteed to make sure that customers have some peace of mind after each auto service appointment.

While performing standard oil changes, mechanics might conduct a multi-point inspection that is used to detect any other potential issues that have to be resolved within a reasonable time. For example, drive belts that seem cracked and chipped need immediate replacement or else engine failure can result. A free battery test is usually conducted during a routine auto service. Batteries that are discharged below an acceptable level will have to be replaced within several weeks to a few months. Sometimes, auto technicians can actually adjust some of the fluid levels in car battery cells in order to eliminate the need for replacement in the near future. The electric panel under the hood might also be inspected for any fuses that have been blown as a result of improper installation of external electrical components like headlamp resistors.

During a standard maintenance appointment, auto technicians also check manufacturer’s guidelines to determine if a vehicle is due for other routine procedures. A service such as Pennsylvania tire rotation and wheel alignment are examples of auto maintenance that is done at least once per year. Digital diagnostics are used to balance all wheels and tires that have been taken off and replaced during a service. Additionally, auto mechanics make sure that the lug nuts are fastened according to a specific torque setting as recommended by the vehicle manufacturer.